WEEK 11 (FYP 2)

WEEK 12 : Set up new hardware

OBJECTIVE:
1) To build my final year project based on the new hardware.
2) To determine my new project hardware is  completely function.

METHODOLOGY:
1) Connect the PIR sensor at D6 node MCU pin.
2) Connect the LDR 1,2 and 3 sensor at
3) Connect LED 1,2 and 3 at pin
4) Set up Blynk application for this project.
5) Add 3 buttons, 4 LED  and 1 timer in the Blynk application.

RESULT :

Figure 38: New hardware of my project.

Figure 39: New project is functioning well

ANALYSIS AND DISCUSSION :
When there has a movement on the PIR Sensor, the signal will trigger and will turn ON the LED in the Blynk application. User can set up timer to turn ON three LED. When the LED is ON, it will trigger the LDR sensor and will send the signal to the Blynk application. The LED on the Blynk application that represent the home appliances will turn ON.

CONCLUSION:
As the conclusion, the new hardware function successfully.